Master Urethane Bushing Kit, 70-78 240Z-260Z-280Z

Description:
This is a discounted kit for the most common urethane bushings, including bushing sets for the control arms, sway bars, tension rods, steering rack, and mustache bar. Also included is a urethane steering coupler. Includes grease.

Image Note:
Both 240Z and 260Z/280Z kits are shown in the image. Depending on the year you select, you will receive either 23-4131 OR 23-4132, and 23-4150 OR 23-4151.

All Kits Include The Following:

• Urethane Control Arm Bushing Kit, 70-78 Z Front (23-4136)
• Urethane Control Arm Bushing Kit, 70-78 Z Rear (23-4137)
• Urethane Tension Rod Bushing Kit, 70-83 Z/ZX (23-4138)
• Urethane Differential Mustache Bar Bushing Kit, 70-78 Z (23-4139)
• Urethane Steering Coupler, 70-81 Z/ZX Manual Steering (23-4160)

...And The Two Of The Following That Match Your Selected Year:

• Urethane Sway Bar Bushing Kit, 70-73 Z (23-4131)
• Urethane Sway Bar Bushing Kit, 74-78 Z (23-4132)
• Urethane Steering Rack Bushings, 70-73 Z (23-4150)
• Urethane Steering Rack Bushings, 74-78 Z (23-4151)

To Mix Part 70-73 & Part 74-78 Kits For A Custom Application Please Call

IMPORTANT!:
The outer metal sleeve of the factory differential mustache bar bushings are retained for use with this kit. Urethane Mustache Bar Bushings can normally be pressed in by hand or with simple tools (such as a c-clamp). Please call with any questions prior to removing your stock mustache bar bushings.

Spindle Pin Bushing Note:
The O.E. Spindle Pin Bushings must be completely pressed out to be replaced with the Urethane bushings. Be careful that the inner surfaces of the Control Arm where the Spindle Pin bushings insert are not damaged or heavily scratched, that surface needs to be smooth for proper care of your new Urethane bushings. Professional removal and replacement of Spindle Pin Bushings recommended.

Hardware Notes:
Inspect your old hardware for damage and rust prior to installing the new urethane bushings. We offer many hardware components, as well as some kits, to replace the most common hardware. The most commonly needed hardware pieces are the Spindle Pins, Sway Bar End Links, and Rear Control Arm Bolt Flat Washers (available with our Reproduction Rear Control Arm Bolts). Click the above links to the individual bushings for more detailed notes, or see Related Items for these components and more.

Model Guide:
Datsun 240Z, 260Z, 280Z

Code Guide:
Datsun S30

Year Guide:
1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978