Motorsport Auto

You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.

Part #:23-4102

Price: $349.87

Some Thoughts About Sway Bars
Sway bars are really anti-roll bars. Their primary function is to minimize body lean; therefore; increasing the car's handling capabilities. In effect, sway bars are sort of a torsion bar. They work by stiffening the chassis to resist body roll. What size bars are best for your Z? That depends on how and where you'll be using the car. For most street driven vehicles, you need to strike a good balance between performance potential and ride quality. Contrary to some stories you may hear, oversized sway bars will adversely affect your car's ride quality. Remember that sway bars are a chassis stiffener. Consider how hard you drive and the condition of your local roads. Motorsport sway bars are sized to make your Z handle better while retaining a ride quality similar to the stock suspension. Our sway bars are manufactured from automotive grade spring steel. Since sway bars are torsion bars (a form of springs), regular steel will not do in this application. In addition, the Motorsport sway bar uses end link mounts that are forged. Welded on end link mounts are prone to failure.

Includes:

(1) 1" Front Powder Coated Sway Bar
(1) 7/8" Rear Powder Coated Sway Bar
(2) Front Sway Bar Mount Bushing
(2) Rear Sway Bar Mount Bushing
(2) Front Sway Bar Mount Bracket
(4) End Link Assembly (w/ Bushings)
(1) Bushing Grease
(1) Instructions

MSA Sway Bar Kits
Developed to our specifications, these sway bars substantially reduce body roll and increase cornering force. Manufactured to the highest quality specifications using automotive-grade spring steel for long life, better fit, and best function. Made with forged ends. Includes urethane bushings and plated installation hardware. For best handling characteristics, our bars were designed for installation as a set (front and rear). Sold only in pairs as a complete kit.

Model Guide:
Datsun 260Z, 280Z

Model Restriction:
*Fits "late" 1974 260Z models produced from 9/74 through 11/74. If you have a 9/73 to 8/74, then you have the "early" 260Z and will need part 23-4105 (see Related Items). For models originally purchased outside of North America, or if you are simply unsure of which kit you need, please inspect your factory rear sway bar and give us a call at (714)639-2620 or email us.

Code Guide:
Datsun S30

Year Guide:
1974*, 1975, 1976, 1977, 1978