Motorsport Auto

You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.

Part #:15-6308

Price: $297.87

Includes:

(1) MSA Premium Exhaust System*

Description:
This completely re-designed performance exhaust system was engineered specifically for your 9/74-78 260Z/280Z, when you are installing, or have already installed our 15-6012 or 15-6013 header systems (HEADER NOT INCLUDED). The connections between the header and pipe 1, and then pipe 1 to pipe 2, are flanged (pipes are 2.5" diameter). The "turbo" style muffler ("turbo" refers to the designed flow of the exhaust through the muffler, not to a turbocharged engine) is connected to the rear long pipe by a standard clamp. Includes chrome exhaust tip. This complete system replaces all pipes and mufflers from our header to the tailpipe. The long piping is aluminized for long life and corrosion resistance. This is the ONLY exhaust system that will work properly with our 6-into-1 header system. If you have chosen our "Three Into Two" header system, choose the 15-6301 exhaust instead (see Related Items).

*System Includes:

(1) 2.5" Front Exhaust Tube Section, Flanged
(1) 2.5" Rear Exhaust Tube Section, Flanged
(1) "Turbo" Style Muffler
(1) 2.5" Inlet Chrome Exhaust Tip w/ Rolled Lip
(2) 2.5" 3-Bolt Flange Gasket
(2) 2.5" Exhaust Clamp
(2) Exhaust Hanger
(1) Flange Hardware Pack
(1) Instructions

Note:
All performance exhaust systems, no matter the manufacturer or type, will be louder than the stock exhaust system. This is an unavoidable consequence of reducing back pressure and therefore increasing performance. This is especially true upon acceleration when exhaust pressures are at their highest. This premium system, with a "turbo" style muffler, is no exception. This type of muffler, however, was designed to limit the level of sound, especially when the engine is not being pushed. Therefore while it will be significantly louder under heavy acceleration, especially when connected to a header as opposed to the stock exhaust manifold, it should only have a pleasing "low rumble" tone during normal operation. Please call us if you have any questions.

Installation Note:
Oval performance mufflers should be positioned at an angle for a proper fit on 70-78 Z-Cars. Note that for 8/74-78 Z's that still have the original bumper mounts, you will not be able to get quite this ideal of an angle due to interference, but a slight alteration should work fine. Please give us a call if you have any questions.

Model Guide:
Datsun 260Z, 280Z

Model Restriction:
For coupe models only. Please call for 2+2 options.

Code Guide:
Datsun S30

Year Guide:
1974, 1975, 1976, 1977, 1978