Solid Shifter Pin Bushing Upgrade Kit, 72-81 240Z-260Z-280Z-280ZX Non-Turbo w/ Manual Trans.

Includes:

• (2) Solid Shifter Pin Bushing
• (1) Factory Shift Lever End Bushing
• (1) Factory Shifter Pin
• (1) Factory Shifter Pin Clip
• (1) Factory Transmission Shift Boot

Description:
This kit provides the optimal solution for those who want to upgrade their shifter bushings to the best option available. It includes all of the recommended components that should be replaced during the bushing upgrade. Read on below for more details about the Solid Pin Bushings.

Original plastic Shifter Pin Bushings are known for wearing out and causing sloppy shifter movement. Similar to solid bushings that Nissan Competition discontinued a long time ago, these solid Shifter Pin bushings are the answer. They are manufactured in the USA from self-lubricating 932 Bearing Bronze. Once installed, the firm feel of your shifter will pleasantly surprise you. While Self-Lubricating Bronze can be used "dry", it is even more amazing with good quality grease. With a high end bearing grease, these bushings will most likely far outlast your Z!.

Original Transmission Lever Type:
These bushings will only fit in 72-81 "B-Style" transmission shift levers. B-Style transmissions have a horizontal pin that holds the lever in place and uses a pair of cylindrical nylon bushings (which this kit replaces). If your transmission uses vertically mounted rubber bushings (70-71 A-Style), or if your shift lever has rectangular bushing holes with springs (factory 82-83 N/T B-Style), this kit will not work. Likewise, if the transmission and lever in your 70-71 model matches the 72-81 B-Style description, then this bushing kit will work. Please give us a call at (714)639-2620 if you aren't sure which transmission type you have prior to ordering.

Note:
If you painted or powder coated your shift lever, that coating may need to be removed from the pin area, as these bushings are a very precise fit. Ensure that your lever is completely free of any rust or debris prior to installation. Please call if you have any questions.

Model Guide:
Datsun 240Z, 260Z, 280Z, 280ZX

Model Restriction:
For models currently equipped with a factory non-turbo model manual transmission (72-81 71B) with original shift lever or our Short Throw Shifter kit only. Will not fit on models currently equipped with an early 240Z (70-71 71A), turbo model (90A) transmission, late 280ZX (82-83 71B) shift lever, or an automatic transmission.

Code Guide:
Datsun S30, S130

Year Guide:
1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981

Support Independent Z Engineers!
Please support the local independent engineers that bring so many great products to the Z Community. The Engineer who brought the great performance bushings in this kit to Z Enthusiasts everywhere is the same individual who has spent countless hours researching, developing, and even reproducing a wide range of custom Z parts and upgrades, such as the original 240Z 4-Piston Brake Caliper kits.
This local engineer personally crafts the custom Reinforcement Brackets for this kit, right here in Southern California, with materials made in the USA. Nobody comes close to his design, quality, and accuracy. Support his contribution to the Z Community by buying the originals, so this great asset to all Z Enthusiasts can continue to create great new products for the Z-Car. Thank you.

Some parts may not fit every version of every year listed. See product Title & Description for any application breakdowns or customization options, and contact us with any questions.

• 1972 Datsun 240Z
• 1973 Datsun 240Z
• 1974 Datsun 260Z
• 1975 Datsun 280Z
• 1976 Datsun 280Z
• 1977 Datsun 280Z
• 1978 Datsun 280Z
• 1979 Datsun 280ZX
• 1980 Datsun 280ZX
• 1981 Datsun 280ZX